Replace the fan for a larger 120mm one and you are good to go!
The product performs well enough on its own without any modification with the normal fan provided as long as you stick to stock speeds or a 4.0ghz oc but if you are like me and seek extreme performance simply swap out the fan with a 120mm one and your performance will be improved greatly. I had to use some clear packaging tape in two places in order to hold the fan in place and rest it on top of the heatsink as there are no mounting holes but thanks to that I can keep my 6700k at 4.44ghz without worry for temps. With hyperthreading disabled (to save on heat) I can go to 4.5 or 4.6. My 6700k IS de-lided though which is necessary if you hope to achieve maximum performance out of you're Intel cpu but all things considered, I call this a win.
Gives me max temps of 35c using a pentium G3258 under full load and is perfect for my itx build. Not terribly loud when working at full capacity, but you will be able to notice the noise. I didnt mind. Overall an amazing heatsink.
I bought this cooler in place of another cooler. This was not as good, but I wanted a smaller cooler and it looked really good. The installation is quite easy, except the back plate did not fit very well, so there is a lot of tension (I feel) on the screws and nuts. My temperatures are a bit higher but still quite good. Overall, a decent budget cooler!
it is good, i think i can be fit in most build, but in my build i can not fit it with my ram(trident Z rgb) and the mos heatsingk.eventraly i cut a pat of it to put it there.