Bought this for My lady’s bike and had several issues with it. It includes 2 black space washers to put behind the turn signal holder and they was cut way to large and the nut would just go right thru it. Then after mounting it there was no center hole in the same part to feed the signal wires thru so I had to use extra parts to make it work and drill a small hole and feed the wires and silicon around them for water proofing. Pretty aggravated a few times. Also the tag holes do not match a tag so you have to alter that some too. Lol but it came together and looks good compared to stock fender on the cbr300r. Be prepared to make a few extra holes and you’ll be alright
The big plate cove that bolts on to sub frame is off in size because the factory pieces would quit snap back together right. Need to shave a little plastic off each side to create a little more room. Also 2 of the push pin holes did not line up right at all. Had to drill my own 2 holes. Ok for the price but to much customization needed.
Holes dont line up with a motorcycle tag, its all plastic and flimsy. It was difficult to install and mods needed to amke fit. Not worth the $55 for it.