Fix-A-Floor Extra Strength Bonding Adhesive for Loose and Hollow Tile Repair - 300ml

Glues Australia (4611)
97.8% positive feedback
Price:
AU $49.95
Free postage
Estimated delivery Fri, 2 May - Thu, 8 May
Returns:
30-day returns. Buyer pays for return postage. If you use an eBay postage label, it will be deducted from your refund amount.
Condition:
Brand New
Fix-A-Floor Repair Adhesive " Now Patented", is an Extra Strength Bonding Adhesive customized for the specific use of Re-Bonding loose and hollow tile, marble, stone & creaky wood floors without the expense and mess of removing or replacing them. Fix-A-Floor is a simple do it yourself repair that is fast, easy and affordable not to mention fun and quite rewarding to anyone who can operate a drill, caulking gun and mix up a small batch of grout. Works on all sub-floor materials. Just Drill & Fill! The Tip The Tip of the 10.1 oz. Fix-A-Floor tube has been specially designed and engineered with a pre-drilled 1/8" hole for the sole purpose of filling drilled holes in loose & hollow tile, marble, stone & wood floors. The Tip is extra firm and allows for a strong seal which promotes.

About this product

Product Identifiers

BrandFix-A-Floor
MPNFIX010
Ean0859704003066
GTIN0859704003066
UPC0859704003066
eBay Product ID (ePID)22034148275

Product Key Features

TypeTile Adhesive

Additional Product Features

SizeNot Relevant

Ratings and reviews

4.5
35 product ratings
  • 28 users rated this 5 out of 5 stars
  • 3 users rated this 4 out of 5 stars
  • 0 users rated this 3 out of 5 stars
  • 0 users rated this 2 out of 5 stars
  • 4 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

  • Good product.

    Worked just like the video on you tube, you just have to apply it every 10 minutes , as it sinks down slowly . Took me about 50 minutes (5) times . Ideally give it 48 hours to set. You usually need more than you think, two large tiles took up the whole tube.

    Verified purchase: YesCondition: New

  • High quality product - it does what it promises with little effort.

    Just follow the instructions on the side of the tube and it works as described. A small 3mm masonry bit is big enough. Make sure you put your finger over the outlet when moving between holes though. Its easy to clean up with water and a sponge. Within 24 hrs the 'drumminess' has gone, if not drill more holes and continue to inject. Really great to not have to lift the tiles, remove render and re-cement.

    Verified purchase: YesCondition: New

  • "Fix-A-Floor" is a lower cost alternative

    "Fix-A-Floor" is good value at $9.50 with local pickup but expensive at $20+. Have use 47 cartridges to date and is easy to apply and have achieve a 90% success rate. Leave for 2-3 days with weights on before moving to next section. The biggest problem was rounding up enough buckets and weights. The std 3mm tungston-carbide drills work very well on the grout but am yet to use them on the actual tiles to rectify hollows in the centre of some tiles. Using this product is a lower cost alternative to relaying the tiles and in my case installing a new kitchen.

    Verified purchase: YesCondition: New

  • very pleased exellent

    I was very pleased with the producit it worked really well, the only caution I would say is that although it takes a reasonable amount of pressure to disperse the fix-a-floor under the tile be careful not to squeeze to hard , just slow and gently does the trick otherwise the plunger in the tube fail and glue gets back past it.

    Verified purchase: YesCondition: New

  • Excellent Floor Adhesive

    This is an awesome product and very easy to use

    Verified purchase: YesCondition: New

  • Do not waste your time

    It might work in some specific situations - but it did not do anything for my issue. It's just a glorified PVA glue and it costs 6 times more than in USA

    Verified purchase: YesCondition: New

  • Buy it and you will see how good it is.

    This is a great product ,easy to use, much cheaper and easier that getting the bloody Floor tiler who put the tiles down in the first place

    Verified purchase: YesCondition: New

  • Fix "crunchy" floor tiles

    This product solved a long term problem we had been avoiding, thinking the solution involved expense and risk of damage to tiles we could not easily replace. There was no obvious movement with our tiles, just a "crunching" noise. "Fix-A-Floor" did the trick as it filled the small voids under the tiles and it is so much simpler than lifting tiles. Plenty of YouTube tutorials for the non-handy person. Peter - Sydney

    Verified purchase: YesCondition: New

  • Does not work as described

    This product did not work as described. When I drilled through the grout, it does not leave a clear path to the void in the tile because the grout when press between the tiles goes under the each side of the tile a bit and the bit under cannot easily be removed. So it is impossible to squirt the Fix-a-Floor under the tile and into the void.

    Verified purchase: YesCondition: New

  • Effective

    Product is effective, have bought multiple tubes over the past year. Results last - just takes a few tubes if a number of tiles with issue.

    Verified purchase: YesCondition: New